KuWFi 2-Pack 300Mbps Wireless Outdoor CPE Kit Point-to-Point Wireless Access Point 2.4G WiFi Bridge Supports 1KM Transmission Distance Solution for PTP/PTMP (Pre-Program)

$59.99

In stock

Make sure this fitsby entering your model number.
【What CPE70R is】KuWFi CPE70R is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE70R’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE70R give you ‘eyes on’ places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR

Compare

$59.99

Description


KuWFi CPE70R is an 2.4G outdoor Long Range wifi bridge CPE with LED display. it work in pairs for point to point connection,make more than 16PCS IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks
2.4G 300Mbps Data Rate
CPE70R features 802.11n Wi-Fi and MIMO technology, 2.4G 300Mbps wireless speed ensures high speed internet access and more end users access

High Gain Antenna for More Range
Build in 12dBi MIMO panel antenna(embedded), Tx power up to 28dBm. stronger signal strength, more wireless coverage

Power over Ethernet – WAN Port support passive PoE
CPE70R has integrated passivePower over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure

Multi-Mode-Updated version (without PPPOE Mode)
– Support Wireless AP, Repeater operation mode
– Support SSID broadcasting, Multi SSID up to 4
– Support DHCP server

Network Security
– With function of build in firewall, IP filter, URL filter and MAC filter
– Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment
-Support 128bit WPA、WPA2、WPA-PSK、WPA2-PSK security
Outdoor Performance Waterproof/dust proof/lighting protection; Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
Main Feature
– 1*10/100Mbps WAN Port, 1*10/100Mbps LAN Port
– FLASH * DDR2: FLASH 8MB * DDR2 64MB
– Size: 168mm*88mm*57.6mm

What you get ?
CPE70R- 2pcs
POE Power Adapter (24V0.5A) – 2pcs
Quick Start Guide – 1pcs
Ethernet Cable (1meter) – 2pcs
Plastic Hoop – 4pcs

Make sure this fitsby entering your model number.
【What CPE70R is】KuWFi CPE70R is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE70R’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE70R give you ‘eyes on’ places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance
【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND. Firmware download :https://drive.google.com/file/d/1PqoEyhRIO0k60RaXpWxvB8j2vquXnm_L/view?usp=sharing

Main Menu

KuWFi 2-Pack 300Mbps Wireless Outdoor CPE Kit Point-to-Point Wireless Access Point 2.4G WiFi Bridge Supports 1KM Transmission Distance Solution for PTP/PTMP (Pre-Program)