Car Radar Detector Alarm Blind Spot Mirror Sensor Auto 24ghz Assist Truck 77ghz Bsm Bsd Electronic Assistance System
$10.81 – $590.51 (-32%)
Blind radar detector function:
When some one nearby your car, but you could not see it from the side mirror, then the blind radar system could detect and warning you by the led and buzzer.
It fit for DC 12V car and motorcycle, there is 5 meter standard wiring material. also fit for DC24V truck, bus, there is 10 meter standard wiring material, if your vehicle longer then 10 meter, please tell us.
The 24ghz blind spot monitoring could detect vehicles overtake of your car from behind. it detect range is 0-8 meter, and the led and buzzer will be warning you.
The 77ghz radar:
1. BSD Blind Spot Pre-warning (Detection range: Horizontally 4 meters, longitudinally 15 meters) Working Logic: Vehicle’s own speed is higher than 10Km/Hour, BSD pre-warning mode is started:
2. LCA Vehicle Approaching Pre-warning (Detection range: Horizontally 4 meters, longitudinally 50 meters) Working logic: Start after powering on, the target object enters the alarming range and the relative collision time＜3.5 seconds, LCA vehicle approaches the pre-warning mode is started:
3. AOA Overtaking Pre-warming (Detection range: Horizontally 4 meters, longitudinally 15 meters) Working logic: Vehicle’s own speed is higher than 10km/Hour, AOA overtaking pre-warning mode is started:
4. RCT Reversing Pre-warning (Detection range: Horizontally 5 meters, longitudinally 5 meters) Working logic: Put into R (reversing gear), RCT revering pre-warning mode is started.
Easy to install
* Fix the radar sensor to the back of the car after remove the rear bumper.
* The higher the radar installation height, the farther the detection distance.
* Connect each two connectors of the same color about the radar system.
* Replace the original car side mirror glass, connect the led wire to the radar system.
* Connect the wire near by the glass to the indicator light positive electrode for control the buzzer work.
* Connect the power wire to the car ACC positive electrode. and connect negative electrode to the battery negative electrode.
24GHZ for DC12V, 77GHZ for DC12V, 5M Extension harness, 24GHZ with mirror, 24GHZ for DC24V, 77GHZ for DC24V, 77GHZ With mirror